These resistance temperature sensors with a cable and thermocouple temperature sensors with a cable are designed to measure the temperature of gaseous and liquid substances. The maximum temperature range of use of the sensors is -40 to 105 °C. Used type of lead-in cable is a PVC type with insulation up to 80 °C with shielding up to 105 °C without shielding. The diameter of the case also enables the encasement of special temperature sensors – KTY, SMT 160, DS 18B20, TSic etc. In combination with the stainless steel thermowell JTG8, the sensor can be used for measuring the temperature in pipelines, as well as a pressure device as defined in Government Regulation no. 26/2003 coll., as amended. the sensors are designed for universal use, the method of use must be chosen for the temperature and chemical resistance of the case and supply cable.
TGL and TGLJ – diameter 5.8 mm, -40 °C to 105 °C
Specification
| Sensor type | TGL | TGLJ |
|---|---|---|
| Use | general | for JTG 8 thermowell |
| Measuring range | -40 to 105 °C (can be limited by the type of cable) | |
| Type of sensing element* | all types (Pt 100, Pt 1000, Ni 1000, Ni 10000, Ni 2226=T1, NTC, PTC, KTY, TSiC, DALLAS, thermocouples K, J, T and so on) | |
| Ingress protection | IP 67 in accordance with EN 60529, as amended | |
| Case material | stainless steel DIN 1.4571; 1.4301 | |
| Diameter of case | 5.8 mm | |
| Length of case L | 40 and 60 mm | |
| Lead-in cable |
PVC shielded 2 x 0.34 mm2 or 4 x 0.25 mm2 (-40 to 80 °C) PVC unshielded 2 x 0.35 mm2 or 4 x 0.35 mm2 (-40 to 105 °C) |
|
| Wire resistance | 0.11 Ω for 1 m of cable for 2-wire connection | |
| Time response | t0,5 < 7 s (in flowing water at 0.4 m.s-1) | t0,9 < 45 s (in flowing water at 0.4 m.s-1) |
Dimensional Draft
Wiring Diagram
