These resistance temperature sensors with a cable and thermocouple temperature sensors with a cable are designed to measure the temperature of gaseous and liquid substances. The maximum temperature range of use of the sensors is -50 to 200 °C. Used type of lead-in cable has silicone insulation and shielding. The diameter of the case also enables the encasement of special temperature sensors – KTY, SMT 160, DS 18B20, TSic etc. In combination with the JTG 8 thermowell, the sensor can be used for measuring the temperature in pipelines, as well as a pressure device as defined in Government Regulation no. 26/2003 coll., as amended. The sensors are designed for universal use, the method of use must be chosen for the temperature and chemical resistance of the case and lead-in cable.
TG 8 and TG 8J – diameter 5.8 mm, -50 °C to 200 °C
Specification
| Sensor type | TG 8 | TG 8J |
|---|---|---|
| Use | general | for JTG 8 thermowell |
| Measuring range | -50 to 200 °C (can be limited by the type of cable, determine in documentation) | |
| Type of sensing element* | all types (Pt 100, Pt 1000, Ni 1000, Ni 10000,Ni 2226=T1, NTC, PTC, KTY, TSiC, DALLAS, thermocouples K, J, T and so on) | |
| Ingress protection | IP 67 in accordance with EN 60529, as amended | |
| Case material | stainless steel DIN 1.4571; DIN1.4301 | |
| Diameter of case | 5.8 mm | |
| Length of case L | 40 to 200 mm | |
| Lead-in cable |
shielded silicone 2 x 0.34 mm2 shielded silicone 4 x 0.22 mm2 |
|
| Wire resistance | 0.11 Ω for 1 m of cable for 2-wire connection | |
| Time response | t0,5 < 7 s (in flowing water at 0.4 m.s-1) | t0,5 < 45 s (in flowing water at 0.4 m.s-1) |
Dimensional Draft
Wiring Diagram
