These resistance temperature sensors with a cable and thermocouple temperature sensors with a cable are designed to measure the surface temperature of solid substances. The maximum temperature range of use of the sensors is -30 to 200 °C and these limits must not be exceeded even for a brief period. The structure of the sensors, which includes an M6 thread, enable the measurement of solid substances right below the surface. The sensors are designed for use in a chemically non-aggressive environment. The method of use must be chosen with regard to the temperature and chemical resistance of the case and lead-in cable.
TG 6 – thread M6, -30 °C to 200 °C
Specification
| Sensor type | TG 6 |
|---|---|
| Measuring range | -30 to 200 °C (can be limited by the sensing element, determine in documentation) |
| Type of sensing element* | Pt, Ni, NTC, TCK, TCJ, TCT |
| Ingress protection | IP 67 in accordance with EN 60529, as amended |
| Thread / OK | M 6 / OK 12 |
| Case material | brass |
| Length of thread | 9 mm |
| Lead-in cable |
shielded silicone 2 x 0.22 mm2 shielded silicone 4 x 0.15 mm2 |
| Wire resistance | 0.16 Ω for 1 m of cable for 2-wire connection |
| Time response | τ0.5 < 4 s (in flowing water at 0.2 m.s-1) |
| Maximum allowable cable tension | 1 kg |
*) Certain technical specifications of thermocouple sensors (lead wires, IP rating, etc.) may differ with different types.
Note: Manufacturer reserves the right to make changes in design and technical characteristics of the products. For actual information, please always contact your dealer.
Dimensional Draft
Wiring Diagram
