These resistance temperature sensors with a cable and thermocouple temperature sensors with a cable are designed to measure the temperature of gaseous substances. The maximum temperature range of use of the sensors is 0 to 400 °C, or 500 °C short-term for the active part of the sensor case after the thread. Used type of lead-in cable has teflon insulation with shielding. The temperature in the surroundings of the cable must not exceed 250 °C. The sensors are primarily designed for measuring the temperature of flue gases and combustion products in the flues of fireplaces, stoves and boilers. The method of use must be chosen with regard to the temperature and chemical resistance of the case and lead-in cable.
TR 068C – diameter 6 mm, 0 °C to 400 °C
Specification
| Sensor type | TR 068C |
|---|---|
| Measuring range | 0 to 400 °C (500 °C in a short-term) |
| Type of sensing element* | Pt 100, Pt 500, Pt 1000, TCK, TCJ |
| Ingress protection | IP 64 in accordance with EN 60529, as amended |
| Thread / OK | M 10 x 1.5/OK 12 |
| Case material | Stainless steel DIN 1.4301 |
| Diameter of case | 6.0 ± 0.1 mm |
| Length of case L | min. 60 mm, max. 130 mm |
| Lead-in cable | shielded teflon 2 x 0.14 mm2 |
| Wire resistance | 0.3 Ω for 1 m of cable for 2-wire connection |
*) Certain technical specifications of thermocouple sensors (lead wires, IP rating, etc.) may differ with different types.
Note: Manufacturer reserves the right to make changes in design and technical characteristics of the products. For actual information, please always contact your dealer.
Dimensional Draft
Wiring Diagram
