These resistance temperature sensors are designed to measure the temperature of gaseous, liquid or solid substances. The maximum temperature range of use of the sensors is -50 to 200 °C. The resistance signal of the temperature sensor is led by a pair of cables with teflon insulation, whereby ensuring the minimization of heat transfer and thus achieving higher accuracy of measurement even at shallow immersion depths. The diameter of the case enables quick response to changes in temperature. the sensors are designed for use in a chemically non-aggressive environment. The method of use must be chosen with regard to the temperature and chemical resistance of the case and lead-in cable.
TR 030 – diameter 4 mm, -50 °C to 200 °C
Specification
| Sensor type | TR 030 |
|---|---|
| Measuring range | -50 to 200 °C (can be limited by the sensing element, determine in documentation) |
| Type of sensing element* | Pt, Ni, NTC |
| Ingress protection | IP 52 in accordance with EN 60529, as amended |
| Thread / OK | M 10 x 1.5 / OK 12 |
| Case material | stainless steel DIN 1.4301 |
| Diameter of case | 4 mm |
| Length of case L | 20 to 60 mm |
| Lead-in cable | 2 x LT 0.07 mm2 with Teflon insulation |
| Wire resistance | 0.51 Ω for 1 m of cable |
| Time response | τ0.5 < 5 s (in flowing water 0.2 m.s-1) |
*) Certain technical specifications of thermocouple sensors (lead wires, IP rating, etc.) may differ with different types.
Note: Manufacturer reserves the right to make changes in design and technical characteristics of the products. For actual information, please always contact your dealer.
Dimensional Draft
Wiring Diagram
