These resistance temperature sensors with a cable and thermocouple temperature sensors with a cable are designed to measure the temperature of gaseous or solid substances. The maximum temperature range of use of the sensors is 0 to 200 °C, 250 °C short-term. Used type of lead-in cable has glass fibre insulation and metal braiding, the sensors are not resistant to the penetration of moisture inside the case and are intended for use in dry conditions. Cable with metal braiding ensures higher mechanical resistance of the sensor. The sensors are designed for use in a chemically non-aggressive environment. The method of use must be chosen for the temperature and chemical resistance of the case and lead-in cable.
TM 8 – diameter 5.8 mm, -50 °C to 250 °C
Specification
| Sensor type | TM 8 |
|---|---|
| Measuring range | -50 °C to 200 °C, 250 °C short-term (can be limited by the sensing element, determine in documentation) |
| Type of sensing element* | all types (Pt 100, Pt 1000, Ni 1000, Ni 10000, Ni 2226=T1, NTC, PTC, KTY, TSiC, DALLAS, thermocouple K, J, T and so on) |
| Ingress protection | IP 50 in accordance with EN 60529, as amended |
| Case material |
40, 50, 60 mm - stainless steel DIN 1.4571 other lengths - stainless steel DIN 1.4301 |
| Case length L | 40 to 200 mm (steps 20 mm) |
| Diameter | 5.8 mm |
| Lead-in cable |
with glass fibre insulation and metal braiding 2 x 0.22 mm2 with glass fibre insulation and metal braiding 4 x 0.22 mm2 |
| Wire resistance | 0.161 Ω for 1 m of cable for 2-wire connection |
| Time response | t0.5 < 7 s (in flowing water at 0.4 m.s-1) |
Dimensional Draft
Wiring Diagram
